Daikin VRV Inverter K Series - Indoor Unit PCB Ass’y

SiE-05C Test Operation
Test Operation Inverter K Series 75
1.9 Indoor Unit PCB Ass’y
The indoor unit PCB ass’y is equipped with terminals for control wiring and connectors for optional control
accessories .
Group No. setting for central control and various operation setting switches, etc., are set by indoor unit
remote controller.
Ceiling Mounted Cassette Type (Double Flow Type): FXYC-K
1 Service Monitor [HAP] (Green) Lets you check the function status of the microcomputer.
Normal : Flicker
Malfunction : On or off
2 Transmission wiring terminal Terminal for remote controller wiring, indoor - outdoor unit transmission wiring (central wiring), and wiring
for outside input
Remote controller Transmission wiring Outside input
N P F1 F2 T1 T2
3 Connector for capacity setting
adaptor
Connector for inserting the capacity setting adaptor for when replacing with auxiliary PC board. The
adaptor is required for all models.
∗ Fan phase control for FXYF, FXYH and FXYA only.
SI-05C.BOOK Page 75 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html