Daikin VRV Inverter K Series - Control Input (Unified ON;OFF Control)

Wiring Adaptor SiE-05C
388 Appendix Inverter K Series / PLUS Series
Wiring to Central
Remote Controller
Connect the unification adaptor for computerized control to connector No. CN2 of the central remote
controller with the attached wiring for transmission.
5.7.3 Wiring
Part Names and
Functions
External Control
Input (Wiring to
Host Computer
Monitor Panel, Etc.)
Specifications of wiring for transmission
 0.75~1.25 mm² sheathed vinyl cord or cable (double core), Max. length 150 m
5.7.4 Control Input (Unified ON/OFF Control)
Wire as described below according to whether input is “voltage” or “no voltage.”
Contact a Input for
Both Input A and B
(Voltage)
Set the changeover switch (SS1) to “voltage.”
(Factory set: Voltage)
 The black part shows the position of the switch.
SI-05C.BOOK Page 388 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html