Daikin VRV Inverter K Series - Wiring Adaptor for Group Electrical Appendices; Part Names and Functions; Wiring to Outside

Wiring Adaptor SiE-05C
374 Appendix Inverter K Series / PLUS Series
5.2 Wiring Adaptor for Group Electrical Appendices
(KRP4A51 / KRP4A52 / KRP4A53)
The wiring adaptor for group electrical appendices cannot be used in combination with a central remote
controller, unified ON/OFF controller, schedule timer, data station, etc.
<Objective / use>
The wiring adaptor for group electrical appendices is used for turning units on/off and setting temperature
from a remote location, display of operation, and invoking display of malfunction. A single adaptor enables
unified control of groups connected to the remote controller transmission line (N/P).
5.2.1 Part Names and Functions
5.2.2 Wiring to Outside (Host Computer Monitor Panel, Etc.)
Input for Control by
Electric
Appendices (On/Off
Control)
Wire as descibed below depending on whether input is “voltage input” or “non-voltage input.”
 Voltage input
 No-voltage input
SI-05C.BOOK Page 374 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html