Daikin VRV Inverter K Series - Central Remote Controller Part Names and Functions

Test Operation SiE-05C
100 Test Operation Inverter K Series
1.19.2 Central Remote Controller Part Names and Functions
Display Section (All items in the display are lit for the purpose of explanation, contrary to when actually operating.)
1 Refrigerant system display 10 Display of time to clean
The inclaction in the square is lit while the refrigerant system is
being displayed.
Lights when it’s time to clean the element or filter of any group.
2 Display “monitor” 11 Display “under host computer integrated control”
Lights for display “monitor.” Settings cannot be made while this indicator is lit.
3 Display of zoning 12 Display “changeover under control.”
Light for zone set mode. Cool/heat cannot be selected for zones or groups of this display.
4 Display of zone/group 13 Control mode display
Status display indicates whether operation is by zone or group. Displays mode of control (ON/OFF control impossible by remote
controller, centralized, individual, etc.) in code. If there is an
indoor unit stopped due to malfunction, the display indicates that
unit’s unit No.
5 Group No. in operation 14 Unified stop button
Each square displays the state corresponding to each group. Stops all indoor units.
6 Display (preset temperature) 15 Unified operation button
Displays the preset temperature. Runs all indoor units.
7 Display (inspection/test) 16 Operation lamp
Press the inspection/test operation button. Either the inspection
or test lamp lights up.
Lights even if 1 controlled indoor unit is running.
8 Display (malfunction code) 17 Display “operation mode”
Displays the contents of a malfunction. The lamp flashes when a
malfunction stops operation. The contents of the current
malfunction are displayed in the inspection mode.
Indicates status of operation/
9 Display of “time to clean air cleaner element/time to clean air
filter”
18 Display of timer No.
Lights when it’s time to clean the element or filter of indicated
group.
Indicates the operation timer No. when used in combination with
a schedule timer.
SI-05C.BOOK Page 100 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html