Daikin VRV Inverter K Series - Page 384

Wiring Adaptor SiE-05C
370 Appendix Inverter K Series / PLUS Series
5.1.2 Wiring
Operation Signal  Combined use of constant contact (a) and instantaneous contact (a)
 Combined use of voltage 12~24 VDC, no valtage
Control Mode  Remote control mode selector switch (Control contents differ according to input mode. See the
following page for details.)
Display Signal
Fetch
 Display of malfunction signal (no voltage contact [a])
 Display of operation (no voltage contact [a])
Remote temperature setting (Can be set from 16~32˚C.)
Note:  For voltage input, approximately 10 mA of input current per contact is required.
 In the case of input, use a micro-current contact as the input contact.
 There is no polarity for valtage input.
Either plus common or minus common can be used for terminal BC.
 Temperature input is resistance value input of 0~135
Ω.
SI-05C.BOOK Page 370 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html