Page 55 of 62
SK2014‐SON‐002‐TechMnl‐FMCD‐003
displayareawillshow“rEAd”.TheOFFtimersettingwillbeshownuponreadingthedatasuccessfully.Press
TIM
buttontochangetheOFFtimersettingoftheslaveunit.
Upon completion of changing timer settings for the selected day, press
TIMER
button again to exit timer
programming mode. The settings will then upload to the selected slave unit.The next day of the week’s
settingscanbedoneonlyuponcompletionofsendingdatatotheslaveunits.(Repeatsteps1~4ifsettingis
requiredforthenextdayofthe
week).
InGlobalcontrolmode:
Pressing the master unit’s
CANCEL
button for 3 seconds will cancel in all timer settings in all slave
units.
Timersettingswillbebroadcasttoallslaveunits.
e) Clocksynchronizationbymasterunitisasfollows:
Press
TIM
and
TIME
buttonsfor3secondstoactivateclocksynchronizationtoallslaveunits.Masterwallpadwill
respondwithabeepingsound.
f) Keylock
In ordertopreventunauthorizedaccessto the system setting,akey lockfunctionis provided.Holddown
and
for 3 seconds to activate key lock, symbol will lights up. Repeat the same to exit key lock. Only
buttonisapplicableinkeylockmode.
g) Swing
Notapplicable.
h) Sleep
Press
SLEEP
buttontoactivateordeactivatesleepsetting.Thesleepfunctionisv alidincoolorheatmodesonly.
i) Temperaturesetting
Press or to enter into temperature setting mode. The temperature display area blinks indicating the
currentsettemperature.Presstheabovebuttonstoadjustthesettemperature.
j) Modesetting
Press
MODE
buttontochangetheopera tionmode.
k) Fanspeedsetting
Press
FAN
buttontochangethefanspeed.Onlylowspeedisavailablefordehumidificationmode.
To Next Page
Loading...
