Dakewe (Shenzhen) Medical Equipment Co., Ltd
2.Safety
2.1 Safety Precautions
This User Manual contains important information related to operational safety and equipment
maintenance.
As an important part of the product, the User Manual must be read carefully before
installation and use, and always be placed near the instrument.
This instrument is manufactured and tested in accordance with the safety requirements of
electrical equipment for measurement, control, and laboratory use. The product meets the
following safety and EMC testing standards:
(1) IEC61010-1:2010+A1:2016 Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 1: General requirements.
(2) IEC61010-2-101: 2018 Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic
(IVD) medical equipment.
(3) IEC61326-1: 2020 Electrical equipment for measurement, control and laboratory use -
EMC requirements - Part 1: General requirements.
(4) IEC61326-2-6: 2020 Electrical equipment for measurement, control and laboratory use -
EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD)
medical equipment.
Most of the reagents used with the processor are flammable. Do not allow any source of
ignition to enter or come close to the instrument after loading the reagents.
In order to maintain this condition and ensure safe operation, the user must comply with
all safety precautions and warnings in this User Manual.
To Next Page
Loading...