DAKEWE HP300 Plus - Page 20

16
Dakewe (Shenzhen) Medical Equipment Co., Ltd

Reagent Bottle Intelligent Identification System (RBIIS): identification module built in
every reagent bottle enables auto reagent information extraction and position detection
to streamline reagent management
 The equipment is equipped with cleaning xylene pre-heating function, the heating
module under cleaning xylene bottles can heat reagent to 40 - 55℃, further improving
cleaning performance and efficiency.
 The equipment is equipped with remote fill & drain function, the reagent ports
exclusively for easy and automatic remote fill& drain. Following auto pipe cleaning
eliminates cross-contamination.
 Harmful reagent vapor, after being condensed, is filtered through an active carbon filter
before being discharged into the air. In addition, the gas can be discharged outside
through a separate interface on the back of the instrument.

It has four auxiliary dehydration functions such as normal pressure, pressurization,
vacuum, pressurization and vacuum alternately. It also has a stirring function, which
can promote the exchange of reagent liquid and ensure uniform concentration
distribution of soaking reagent.
 The rotary valve made of ceramic material is used for reagent distribution, which has
good reagent compatibility and long service life; at the same time, the rotary valve has
a thermal insulation design to avoid the risk of clogging of the valve hole.
 Each dehydration cylinder can hold up to 300 standard cassettes using 2 sample baskets.
Each basket can hold up to 150 standard cassettes. A single basket can hold 150
cassettes and a maximum of 2 baskets; a single basket can hold 70 cassettes and a
maximum of 4 baskets.
 The equipment has a remote monitoring function, which can monitor the operating
status of the machine remotely. At the same time, it can automatically analyze the
operating status of the equipment and transmit the data to the cloud server. Users can
pay attention to the operating status of the equipment in real time and receive
abnormal warnings in time.

Users can transfer all the dehydration programs and logs via USB.
 A multi-level password protection system can prevent unauthorized access to the
instrument.
 Users can adopt the “reagent / paraffin liquid level check” function to ensure the
connection status of the reagent bottle.
 If a power failure occurs, the alarm system will be triggered, promoting the HP300 Plus
to provide recovery measures after a power interruption.

If an error occurs, an alarm sounds immediately. The system will try to recover first, and
if it is not successful, the instrument will use a safety reagent to fill the dehydration
cylinder if the monitor is not operating within 20min, to ensure sample safety.

There are two alarm modes in total: local alarm and remote alarm to alert the user when