Daktronics RC-200 - Alternate Function Keys

RC-200 Handheld Controller
9
# Key Function
5
CONFIG
ENTER/YES
EDIT
The CONFIG operation of this key is described in Cong Mode (p.6).
The ENTER function of this key pertains to editing and data entry routines. After
editing a value, press <ENTER> to save the change.
The YES function of this key also pertains to editing and data entry routines.
When a question prompt is shown on the LCD, press this key to answer the
question with a “Yes.”
The EDIT function of this key is used to edit the data associated with a
particular key. For instance, pressing <EDIT> followed by a “+1” key will allow
the operator to manually type in a new value using the number keys. Refer to
the application-specic sections for more information about which keys have
EDIT functionality.
Alternate Function Keys
An alternate function of a key, if applicable, will be
shown on the bottom the key below a horizontal
line. Refer to Figure 12 for an example.
• Press the key for primary function.
• Press <ALT> followed by the key for alternate function.
SPORT
INSERT/CODE #
SPORT
INSERT/CODE #
AUTO
HORN
9
1
Primary Function
Alternate Function
3
54
2
Figure 12: Key with ALT Functionality