Daktronics RC-200 - 7 Baseball Operation; Score (+1;-1); Out +1, Inning +1; Ball +1, Strike +1, Clear Ball & Strike

Baseball Operation
18
7 Baseball Operation
Sport Insert: LL-2605
Code: 03, 23
The sport insert drawing is located in Appendix B. If an insert is lost or damaged, a copy
of the insert drawing can be used until a replacement arrives. Refer to Powering the
Controller On & Off (p�5) for information on starting the console and Common All Sport
Application Keys (p�12) for additional All Sport application keys.
Score (+1/-1)
Display Action
HOME SCORE + 1
NN
NN = current setting
Press the home/guest <SCORE +1> key to increase the team
score, or press the <SCORE -1> key to decrease the team score.
The LCD shows which key was pressed and the new value.
HOME SCORE
EDIT NN*
NN = current setting
Press <EDIT> followed by any score key to display the current
setting. Enter the correct value using the number keys, and then
press <ENTER>.
Out +1, Inning +1
Press <OUT +1> or <INNING +1> to increment the total outs or innings, respectively. The
new numbers appear immediately on the LCD.
Display Action
INNING # EDIT
NN*
NN = current setting
Press <EDIT> followed by <OUT +1> or <INNING +1> to display the
current setting. Enter the correct value using the number keys,
and then press <ENTER>.
Ball +1, Strike +1, Clear Ball & Strike
Press <BALL +1> or <STRIKE +1> to increment the pitch types. Press <CLEAR BALL & STRIKE>
to immediately reset both values to 0.
Note: If the ball value is 4 when <BALL +1> is pressed, the value is blanked out. If the
strike value is 3 when <STRIKE +1> is pressed, the value is blanked out.
Hit
Display Action
HIT ON
HIT OFF
Press <HIT> to turn on the hit indicator or digits.
Press <HIT> again to turn off the hit indicator or digits.
The hit status displays briey.
Note: When hit is already on, pressing <ERROR> will turn it off.