EasyManua.ls Logo

Daktronics RC-200 - 6 Volleyball Operation; Score (+1;-1); Won (+1;-1); Reset Game Score

Daktronics RC-200
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Volleyball Operation
17
6 Volleyball Operation
Sport Insert: 0G-239304
Code: 02
The sport insert drawing is located in Appendix B. If an insert is lost or damaged, a copy
of the insert drawing can be used until a replacement arrives. Refer to Powering the
Controller On & Off (p�5) for information on starting the console and Common All Sport
Application Keys (p�12) for additional All Sport application keys.
Score (+1/-1)
Display Action
HOME SCORE + 1
NN
NN = current setting
Press the home/guest <SCORE +1> key to increase the team
score, or press the <SCORE -1> key to decrease the team score.
The LCD shows which key was pressed and the new value.
HOME SCORE
EDIT NN*
NN = current setting
Press <EDIT> followed by any score key to display the current
setting. Enter the correct value using the number keys, and then
press <ENTER>.
Won (+1/-1)
Display Action
HOME WON + 1
NN
NN = current setting
Press the home/guest <WON +1> key to increase the games
won, or press the <WON -1> key to decrease the games won.
The LCD shows which key was pressed and the new value.
HOME WON
EDIT NN*
NN = current setting
Press <EDIT> followed by either won key for the appropriate
team to display the current setting. Enter the correct value using
the number keys, and then press <ENTER>.
Reset Game Score
Display Action
RESET GAME?
ENTER TO ACCEPT
Press <RESET GAME SCORE> followed by <ENTER> to reset both
home and guest scores to zero. This key is used to clear the
Game Score elds at the beginning of each match.
Game (+1/-1)
Display Action
GAME # +1
N
N = current setting
Press the <GAME +1> or <GAME -1> key to set the current game
number.
GAME #
EDIT N*
N = current setting
Press <EDIT> followed by either game key to display the current
setting. Enter the correct value using the number keys, and then
press <ENTER>.

Table of Contents