Daktronics RC-200 - 8 Play Clock & Pitch Timer Operation; Set Reset 1, Set Reset 2; Reset 1, Reset 2

To Next Page

To Previous Page

Play Clock & Pitch Timer Operation

8 Play Clock & Pitch Timer Operation

Sport Insert: LL-2653

Code: 05

The sport insert drawing is located in Appendix B. If an insert is lost or damaged, a copy

of the insert drawing can be used until a replacement arrives. Refer to Powering the

Controller On & Off (p�5) for information on starting the console and Common All Sport

Application Keys (p�12) for additional All Sport application keys.

Set Reset 1, Set Reset 2

Display Action

TIME EDIT

RESET 1 MM:SS*

MM:SS = minutes, seconds

Press <SET RESET 1 •> or <SET RESET 2 •> to set the current Reset 1

or Reset 2 value, respectively, for the play clock/pitch timer.

To change the time, enter the desired value the using the

number keys, and then press <ENTER>.

Reset 1, Reset 2

• Press <RESET 1> to return the timer to the Reset 1 value congured above.

• Press <RESET 2> to return the timer to the Reset 2 value congured above.

For more information about play clock setups featuring server/client Base Stations, refer

to DWG-3639940 in Appendix A.