Daktronics RC-200 - 14 Remote Start;Stop Operation; Start; Stop; Manual Horn;Reset

Remote Start/Stop Operation
33
14 Remote Start/Stop Operation
Sport Insert: 0G-319079
Code: 98
The sport insert drawing is located in Appendix B. If an insert is lost or damaged, a copy
of the insert drawing can be used until a replacement arrives. Refer to Powering the
Controller On & Off (p�5) for information on starting the console and Common All Sport
Application Keys (p�12) for additional All Sport application keys.
Start
Display Action
REM START/STOP
CLOCK OFF
CLOCK START
CLOCK RUN
When the clock is stopped, the LCD will show the clock status on
the bottom line as OFF.
Press <START> and the top line of the LCD will briey show the
function, and then the clock status will change to RUN.
Stop
Display Action
REM START/STOP
CLOCK RUN
CLOCK STOP
CLOCK OFF
When the clock is already running, the LCD will show the clock
status on the bottom line as RUN.
Press <STOP> and the top line of the LCD will briey show the
function, and then the clock status will change back to OFF.
Manual Horn/Reset
Depending on the current jack the Base Station is connected to on the All Sport 5000
controller, this key will have different functions:
• When connected to the J4 (main clock) jack, the key functions as a manual horn.
• When connected to the J7 (shot/play clock) jack, the key functions as a timer reset.
For more information on Remote Start/Stop setups, refer to DWG-3660093 in Appendix A.