Installation Guide
TG-0259_9 TM4 CO200-A3 Installation Guide
© Dana TM4 inc., 2020-2022
1.5 Disclaimer
All installation instructions, limits and warnings given in the technical documentation supplied by Dana TM4
must be respected in order to ensure that the system runs optimally and is not at risk of damage by misuse.
Operating the system outside of the established limits constitutes misuse and may invalidate any warranty.
1.6 Safety instructions
This product must be installed and manipulated by qualified personnel who are fully aware of the types of
hazards involved in working with electrical circuitry and are familiar with standard practices for preventing
accidents. The vehicle integrator is responsible for ensuring that proper training is given to all those who
use this system in order to avoid physical, electrical and operational hazards.
1.6.1 Format and location of safety warnings in this guide
Each warning in this guide follows the same format and includes the reason for the potential hazard and
how to avoid it:
WARNING Reason for the warning – explanation of the potential hazard.
How to avoid the hazard.
Note: When more than one safety warning applies to the same procedure, they are grouped together in
one box and identified with the appropriate safety symbol:
General/Irritant/Operational: This warning symbol indicates that you are in a potentially hazardous
situation that could result in damage to the product or in some situations lead to bodily harm or death.
Electrical: This warning symbol indicates that you are in a potentially hazardous situation that is
electrical in nature and could result in damage to the product or in some situations lead to bodily harm or
death.
To remind you of the potential hazards involved, appropriate safety warnings are located throughout this
guide in procedures that if performed incorrectly may harm you or damage the product.
To Next Page
Loading...
