Compressor
Table 11: Compressor
(1)
In order to change this parameter the regulation must be stopped via the parameter r12 Main switch = OFF.
(1)
In order to change this parameter the regulation must be stopped via the parameter r12 Main switch = OFF.
Defrost
Table 12: Defrost
0=None, 1=Electrical, 2=Hot
gas, 4=Air/Ocycle
Fan control during defrost
0=OFF, 1=ON, 2=OFF at drip,
3=OFF at high temp
0=Time, 1=S5 sensor, 2=S4
sensor
0=OFF, 1=ON, 2=Normal
control
Display delay after defrost
© Danfoss | Climate Solutions | 2022.04 BC378540472015en-000101 | 41
AK-CC55 Water Loop