Danfoss Ally User Manual

14
| © Danfoss | FEC | 2023.06 BC349733524454en-010401
User Guide Danfoss Ally™ Radiator Thermostat
6.8 Removing the Danfoss Ally™ Radiator Thermostat
1. 2.
Press and hold until large M flashes.
This indicates you are in mounting mode
Remove the cover.
3.
Press firmly on the tab and unscrew the
thermostat from the adapter.
Video tutorial:
Danfoss Ally™ Support Page
6.9 Resetting the Danfoss Ally™ Radiator Thermostat to default Settings
1. 2.
Remove the cover and take out one battery.
Press and hold , keep holding while rein-
serting the battery. The screen will go blank
after approx 3 seconds. The thermostat is
now re-set.

Danfoss Ally Specifications

General

Accuracy	50 sec/month
Noise level	30 dB
Product color	White
Smart thermostat	Yes
Operating frequency	2400 MHz
Suitable for indoor use	-
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	5 - 35 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Package weight	250 g
Display type	LCD
Battery type	AA
Power consumption (typical)	1.2 W

Weight and Dimensions

Weight	198 g
Diameter	55 mm