Danfoss Ally User Manual

31
BC349733524454en-010401 © Danfoss | FEC | 2023.06 |
User Guide Danfoss Icon™/Icon2™
14. Danfoss Icon™/Icon 2™ – Room Thermostats for Floor Heating
There are many great occasions to upgrade your underfloor heating control. When you swing
the paintbrush and lack the final finish.
When you are tired of the heat being unevenly distributed in your home. Or when you just want
more comfort and greater savings. Danfoss Icon™ does it all. Quite simple.
14.1 Facts about Danfoss Icon™/Icon2™
• All homes can get smart underfloor heating
with Danfoss Icon™/Danfoss Icon2™ no matter
what system you have today.
All underfloor heating products can be changed
to Danfoss Icon™/Danfoss Icon2™ with all the new
functions that modern underfloor heating control
can offer. Only electronic components need to
be replaced and the installer can do it in just a
few hours. There are no floors to break up and no
water to be drained from the system.
• Full control – even when you are on the go.
Everything else in your home is “smart”. From
sound systems to refrigerators. Shouldn’t your
underfloor heating control be smart too? With
Danfoss Icon™/Danfoss Icon2™ the control of
the temperature, holiday modes and everyday
comfort is safely stored in your own pocket –
even when you are on the go. All of this intuitive
control is just one download away from landing in
your pocket.

Danfoss Ally Specifications

General

Accuracy	50 sec/month
Noise level	30 dB
Product color	White
Smart thermostat	Yes
Operating frequency	2400 MHz
Suitable for indoor use	-
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	5 - 35 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Package weight	250 g
Display type	LCD
Battery type	AA
Power consumption (typical)	1.2 W

Weight and Dimensions

Weight	198 g
Diameter	55 mm