Danfoss Ally User Manual

24
| © Danfoss | FEC | 2023.06 BC349733524454en-010401
User Guide Danfoss Ally™ Room Sensor
10. Danfoss Ally™ Room Sensor
The Danfoss Ally™ Room Sensor is designed
especially for covered radiators when the radiator
thermostat is hidden behind a curtain or a piece
of furniture. But even adding the Room Sensor
to a regular set-up it becomes even easier
to achieve a perfect indoor climate.
The small and discrete room sensor measures
both temperature and humidity, and communi-
cates back to the Ally™ Gateway.
What you get: temperature perfection in every
room.
10.1 Facts about the Danfoss Ally™ Room Sensor:
• Measures the temperature and humidity
• Increases indoor comfort
• Neutral, compact design which fits with most
interiors
• Easy installation with no tools needed
• Controlled from the Danfoss Ally™ App
• Battery-powered with a battery lifetime of up
to 5 years
• Zigbee 3.0 certified
The Danfoss Ally™ Room Sensor is an indoor electronic sensor for measuring room temperature
and humidity.
The room sensor is a part of Danfoss Ally™ system, which is used for wireless linking and con-
trolling of heating systems in a residential and light commercial buildings.
The Danfoss Ally™ Room Sensor has a built-in temperature and humidity sensor, which measures
ambient temperature and humidity. It allows you to increase the indoor comfort and control the
heating in the room where installed.
The Danfoss Ally™ Room Sensor is a Zigbee certified product, compatible with the Danfoss Ally™
Gateway and with the third party certified systems using a Zigbee technology. It is a battery
powered device, compact, easy to install and an ideal for the covered radiators as an external
temperature measurement solution.
NOTE: If you have a Danfoss Ally™ Room Sensor in your room setup, the front sensor of the Radiator
Thermostat, which is responsible for measuring the temperature in the room, will be deactivated.
Product Installation Guide – Languages Code no.
Danfoss Ally™ Room Sensor EN, DE, DK, FR, IT, PL, CZ, UA, SE, RU, ES 014G2480

Danfoss Ally Specifications

General

Accuracy	50 sec/month
Noise level	30 dB
Product color	White
Smart thermostat	Yes
Operating frequency	2400 MHz
Suitable for indoor use	-
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	5 - 35 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Package weight	250 g
Display type	LCD
Battery type	AA
Power consumption (typical)	1.2 W

Weight and Dimensions

Weight	198 g
Diameter	55 mm