Danfoss Ally User Manual

28
| © Danfoss | FEC | 2023.06 BC349733524454en-010401
User Guide Danfoss Ally™ Protect RA
12. Danfoss Ally™ Protect RA
Danfoss Ally™ Protect RA is an accessory
which protects and increases the strength
of the electronic radiator thermostat. The
accessory prevents users from removing the
batteries inside the electronic radiator ther-
mostat or unmount electric radiator thermo-
stat itself without a tool. Danfoss Ally™ Pro-
tect RA gives access to the electronic radiator
thermostat display and handle, allowing the
user to interact with the electronic radiator
thermostat unless these features are disabled
through the gateway. Danfoss Ally™ Protect
RA is composed of 2 plastic parts (and a M3
screw) and can be used with both the Danfoss
Ally™ Electronic Radiator Thermostat and the
Danfoss Eco™, as well as in a combination
with the Danfoss Ally™ Power Module 24V.
Danfoss Ally™ Protect RA does not affect tem-
perature measurement or other performance
of the electronic radiator.
NOTE: Danfoss Ally™ Protect RA will fit only Radiator Thermostats with RA valve.
12.1 Installation
NOTE: Please, connect the Danfoss Ally™ Radiator Thermostat to the Ally™ Gateway, before mounting
Danfoss Ally™ Protect RA.

Danfoss Ally Specifications

General

Accuracy	50 sec/month
Noise level	30 dB
Product color	White
Smart thermostat	Yes
Operating frequency	2400 MHz
Suitable for indoor use	-
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	5 - 35 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Package weight	250 g
Display type	LCD
Battery type	AA
Power consumption (typical)	1.2 W

Weight and Dimensions

Weight	198 g
Diameter	55 mm