27
BC349733524454en-010401 © Danfoss | FEC | 2023.06 |
User Guide Danfoss Ally™ Boiler Relay
11. Danfoss Ally™ Boiler Relay
Danfoss Ally™ Boiler Relay is the ideal acces-
sory to optimize energy efficiency in boiler
systems, by ensuring that the boiler is only ac-
tive when there is an actual heat demand. The
Danfoss Ally™ Boiler Relay is a Zigbee certified
product, compatible with the Danfoss Ally™
Gateway and with the third party certified sys-
tems, using a Zigbee technology.
11.1 Facts about the Danfoss Ally™ Boiler Relay:
• Danfoss Ally™ Boiler Relay will activate or diactivate the boiler, depending on the heat de-
mand. This assures that the boiler will only be running when there is a heat demand.
• Controlled from the Danfoss Ally™ App.
• Zigbee 3.0 certified.
Product Installation Guide – Languages Code no.
Danfoss Ally™ Boiler Relay EN, DE, DK, FR, IT, PL, CZ, UA, SE, ES 014G2479
11.2 Technical Specifications
Danfoss Ally™ Boiler Relay
Power supply Input: Mains 230V~ 50/60 Hz
Output Volt free 3(1)A at 250V~
Operating temperature range 0 °C to 40 °C
Terminals Max 2.5 mm
2
wires
Control pollution situation Degree 2
Controller type 1B
Software class A
Over voltage category III
Temperature for Ball pressure test 75 °C
Approvals, markings etc.
To Next Page
Loading...
