Danfoss Ally User Manual

9
BC349733524454en-010401 © Danfoss | FEC | 2023.06 |
User Guide Danfoss Ally™ Gateway
5.1 Rooms with several Radiator Thermostats
If several radiator thermostats are assigned to one room, then
the Danfoss Ally™ App will automatically create a group tile. This
is to ensure settings are synchronized between devices in the
same room. It is recommended to always adjust a schedule and
preferred temperatures for the entire group, and not for single
devices, to ensure the most efficient performance.
If settings are changed on an individual device, then data is not
synchronised with the group.
5.2 Add new Devices to an existing System
Click on the ‘Danfoss Ally™
Gateway’ tile and add the
needed subdevice from the
suggested list.
Click on the ‘Add subdevice’
button.
Choose the needed device
from the list and continue
process following the
installation flow guideline.

Danfoss Ally Specifications

General

Accuracy	50 sec/month
Noise level	30 dB
Product color	White
Smart thermostat	Yes
Operating frequency	2400 MHz
Suitable for indoor use	-
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	5 - 35 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Package weight	250 g
Display type	LCD
Battery type	AA
Power consumption (typical)	1.2 W

Weight and Dimensions

Weight	198 g
Diameter	55 mm