Danfoss Ally User Manual

18
| © Danfoss | FEC | 2023.06 BC349733524454en-010401
User Guide Danfoss Ally™ Radiator Thermostat
9. Functions and Settings Overview
Temporary setpoint
Room temperature
Manual mode
Heating schedule
Away mode
Pause
At home mode
‘Pre-Heat’ is used to ensure you have
the right temperature when you want
it. When ‘Pre-Heat’ symbol is shown, it
means that it is ramping up to the next
scheduled ‘At Home’ mode.
9.1 Setting Temperatures
Set your own temperatures for your setback periods in the Danfoss Ally™ App.
For changing temperature press Menu button on the main
screen Settings Set temperature.
Scroll on temperatures to set your preferred permanent room
temperature.
In case you need to set a temporary temperature, just turn the
thermostat wheel and choose desired value.
The temporary temperature changes are valid until the next
scheduled temperature change.
The Danfoss Ally™ Radiator Thermostat can be set from 5 °C to
35 °C.
Danfoss recommend a difference between ‘At Home’ tempera-
ture and ‘Away/Asleep’ that does not exceed 4 degrees.

Danfoss Ally Specifications

General

Accuracy	50 sec/month
Noise level	30 dB
Product color	White
Smart thermostat	Yes
Operating frequency	2400 MHz
Suitable for indoor use	-
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	5 - 35 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Package weight	250 g
Display type	LCD
Battery type	AA
Power consumption (typical)	1.2 W

Weight and Dimensions

Weight	198 g
Diameter	55 mm