Danfoss Ally - Danfoss Icon2 RT Settings; 14.7 Connecting Danfoss Icon2 to Danfoss Ally

39
BC349733524454en-010401 © Danfoss | FEC | 2023.06 |
User Guide Danfoss Icon™/Icon2™
Danfoss Icon2™ RT Settings
ME.1 Range limitation
ME.2 Product ID number
001-099 range: 230V Display
100-199 range: 230V Prog.
201-300 range: 24V Display
401-500 range: Wireless display
601-700 range: Wireless IR
ME.3 Signal strenght
ME.4 Floor sensor usage
Comfort / Floor / Dual emitters
ME.5 Floor temperature settings
Tmin / Tmax
ME.6 Set thermostat to reference
room (cooling C/O, appl. 5-10)
ME.7 Enable/Disable cooling in room
(all cooling applications)
Menu
Min.
5°C
Max.
35°C
Product ID / Version
Link Test
Reference Room
Cooling ON/OFF
14.7 Connecting Danfoss Icon2™ to Danfoss Ally™
Before you try to connect them, please ensure that the Icon2™ system have been fully
configured and powered on.
Step 1.
In the Ally™ application, click on your Gateway tile, then
‘Add subdevice’.