Danfoss Ally - Page 38

38
| © Danfoss | FEC | 2023.06 BC349733524454en-010401
User Guide Danfoss Icon™/Icon2™
For the Danfoss Icon2™ Wired Thermostat you can chose
between 4 different versions.
Icon™ 24V RT
Danfoss Icon2™ Main Controller Basic and Advanced Features
Code
number
Version Display
Humidity
sensor
Floor
sensor
In-wall
mounting
Switchable
frames
088U2125
Danfoss Icon2™ 24V
RT, In-wall 80x80
+ ÷ (+) + +
088U2126
Danfoss Icon2™ 24V
RT, In-wall 86x86
+ ÷ (+) + +
088U2127
Danfoss Icon2™ 24V
RT, In-wall (Feller)
+ ÷ (+) + +
088U2128
Danfoss Icon2™ 24V
RT, On-wall
+ ÷ (+) ÷ ÷
Available + Optional (+) Not available ÷
Feature Icon2™ MC Basic Icon2™ MC Advanced
“Ease of installation” features
+ +
Wireless and Wired thermostats
+ +
Floor temperature control
+ +
Multiple heat emitter control
+ +
Zigbee compatibility to Ally™ and 3rd parties
+ +
Setup and commissioning via Commissioning App
+ +
Handover report via commissioning app
+ +
Multiple Main Controllers connected
+ +
Automatic Hydronic Balancing
+ +
HP optimizer function
+ +
Manual floor cooling
+ +
Advanced floor cooling applications
÷ +
Flow temperature control applications
÷ +
NOTE: To get more information about how to install Danfoss Icon2™ MC and powerline diagrams please, use the
installer app as a guideline for installation. Please find “Installer app“ from Danfoss on Google Play and App store.