Danfoss DSH090 - Ordering Information; Dismantal and Disposal

66 pages

To Next Page

To Previous Page

GENERAL INFORMATIONPRODUCT INFORMATIONSYSTEM DESIGNINTEGRATION INTO SYSTEMORDERING INFORMATION

Dismantal and disposal

Danfoss recommends that compressors and compressor oil should be recycled by a

suitable company at its site.

54 FRCC.PC.045.A7.02

Main Page

Default Chapter3
- Table of Contents3
General Information4
Product Information5
Features5
- Overview5
- How Do Idvs Work5
Compressor Model Designation6
- Nomenclature6
Technical Specifications7
- 50-60Hz Data Single Compressor7
- 50-60Hz Data Tandem Compressors8
- 50-60Hz Data Tandem and Trios9
Dimensions10
- Single Compressors10
- Connection Details11
- Tandem Assemblies12
- Trio Assemblies14
Electrical Data, Connections and Wiring15
- Motor Voltage15
- Wiring Connections15
- IP Rating17
- Terminal Box Temperature17
- Three Phase Electrical Characteristics17
- Motor Protection18
Approval and Certificates20
- Low Voltage Directive20
- Machines Directive20
- Pressure Equipment Directive20
- Internal Free Volume20
System Design21
Design Piping21
- General Requirements21
- Tandem and Trio Requirements22
- Suction Washer Position23
- Oil Equalization Design26
Design Compressor Mounting28
- General Requirements28
- Single Requirements28
- Tandem Requirements29
- DSH180E to DSH368E Mounting29
- DSH360X-424X-456X-479X-565X Mounting30
- DSH482 to DSH1455 Mounting30
Manage Oil in the Circuit31
- Requirement31
- System Evaluation31
- Test, Criteria and Solutions31
Manage Sound and Vibration32
- Compressor Sound Radiation32
- Mechanical Vibrations34
- Gas Pulsation34
Manage Operating Envelope35
- Requirement35
- High and Low Pressure Protection37
- Discharge Temperature Protection37
- System Evaluation38
- Test, Criteria and Solutions38
Manage Superheat39
- Requirement39
- System Evaluation39
- Test, Criteria and Solutions39
Manage off Cycle Migration41
- Requirement41
- System Evaluation41
Provide Power Supply and Electrical Protection43
- Wiring Information43
- Soft Starts46
Control Logic47
- Safety Control Logic Requirements47
- Cycle Rate Limit Requirements47
- Oil Management Logic Recommendations47
- Defrost Logic Recommendations / Reversible Systems47
- Pump-Down Logic Recommendations48
Reduce Moisture in the System49
- Requirements49
- Solutions49
Integration into Systems50
Assembly Line Procedure50
- Compressor Storage50
- Compressor Holding Charge50
- Handling50
- Piping Assembly51
- System Pressure Test and Leak Detection51
- Vacuum Evacuation and Moisture Removal52
- Refrigerant Charging52
- Dielectric Strength and Insulation Resistance Tests52
Commissioning53
- Preliminary Check53
- Initial Start-Up53
- System Monitoring53
Ordering Information54
Dismantal and Disposal54
Packaging55
Ordering Codes56
Accessories60

Danfoss DSH090 - Ordering Information; Dismantal and Disposal

Table of Contents

Other manuals for Danfoss DSH090

Related product manuals