Danfoss Eco Installation Guide

23
Danfoss Heating Solutions VIJPD102 06/2015
5. Additional settings
5.1 Setting the time
1. 2.
If the display is off, press , then press both
to open thefuntction menu. Use to
select , press to conrm.
Hours ashes, use to set and press to
confirm. Then Minutes ashes, use to set
and press to confirm.
3. 4.
Date ashes, use to set and press to
confirm. Then Month ashes, use to set
and press to confirm. Then Year ashes, use
to set and press to confirm.
flashes.
Press to confirm your changes of time and
date.
5.2 Deactivating automatic daylight saving time
1. 2.
If the display is off, press , then press both
to open thefuntction menu. Press
again to open theadvance menu.Use to
select , press to conrm.
Use to select , press to conrm.
User Guide eco Intelligent Radiator Thermostat

Danfoss Eco Specifications

General

Package weight	250 g
Accuracy	50 sec/month
Noise level	30 dB
Certification	CE, ERC, EAC
Product color	White
Smart thermostat	-
Spindle movement	2 - 4.5 mm
Operating frequency	2400 MHz
Wireless connection	Yes
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	4 - 28 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Display type	LCD
Battery type	AA
Battery voltage	1.5 V
Power consumption (typical)	1.2 W
Number of batteries supported	2

Weight and Dimensions

Weight	100 g