Danfoss Eco Installation Guide

19
Danfoss Heating Solutions VIJPD102 06/2015
5. 6.
Stop time for the weekend comfort period is
flashing. Use to set the stop time, press
to select.
When flashes, press to confirm the entire
P1 Programme.
4.4 Adjusting the programme settings, P
2
eco P
2
programme is adjusted as P1.
Note - Weekdays have 2 comfort periods.
4.5 Creating a Travel programme
A Travel programme keeps the setback temperature for a period, defined by you.
Use a Travel programme to save energy, when you are away from home.
1. 2.
If the display is off, press , then press both
and hold for 3 seconds to open thefuntc-
tion menu.
Use to select . When the suitcase symbol
flashes, press to conrm.
The current day is ashing. Use to set the
day of departure, press to conrm.
Now the current month is ashing. Use
to set the month of departure, press to
conrm.
User Guide eco Intelligent Radiator Thermostat

Danfoss Eco Specifications

General

Package weight	250 g
Accuracy	50 sec/month
Noise level	30 dB
Certification	CE, ERC, EAC
Product color	White
Smart thermostat	-
Spindle movement	2 - 4.5 mm
Operating frequency	2400 MHz
Wireless connection	Yes
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	4 - 28 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Display type	LCD
Battery type	AA
Battery voltage	1.5 V
Power consumption (typical)	1.2 W
Number of batteries supported	2

Weight and Dimensions

Weight	100 g