Danfoss Eco Installation Guide

20
06/2015 VIJPD102 Danfoss Heating Solutions
User Guide eco Intelligent Radiator Thermostat
3. 4.
The day of return is ashing. Use to set the
day of return, press to conrm.
Now the month of return is ashing. Use
to set the month of return, press to conrm.
The setback temperature is ashing. Use
to set the setback temperature, press to
conrm.
5. 6.
flashes, press to conrm your Travel
programme. is now displayed on the Home
Screen.
When the date of departure arrives, the
display will show: , set Travel period and the
setback temperature.
4.6 Overrule a Travel programme (early return)
If returning earlier than expected you might wish to shift from the Travel programme to your
normal programme.
1. 2.
If the display is off, press . The display will
show: , set Travel period and the setback
temperature.
Press again to open theprogramme menu.
Use to select the usual programme P0, P1
or P2, press to conrm.

Danfoss Eco Specifications

General

Package weight	250 g
Accuracy	50 sec/month
Noise level	30 dB
Certification	CE, ERC, EAC
Product color	White
Smart thermostat	-
Spindle movement	2 - 4.5 mm
Operating frequency	2400 MHz
Wireless connection	Yes
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	4 - 28 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Display type	LCD
Battery type	AA
Battery voltage	1.5 V
Power consumption (typical)	1.2 W
Number of batteries supported	2

Weight and Dimensions

Weight	100 g