Installation Guide | iC7-Automation Air-cooled Enclosed Drives Contents
Contents
1 Overview
1.1 Safety and Installation Awareness 5
1.2 Checking the Delivery and the Contents 5
1.3 Lifting the Enclosed Drive 5
2 Mechanical Installation
2.1 Installation Requirements 7
2.2 Installing the Enclosed Drive 7
2.3 Installing the Enclosed Drives Back to Back 7
2.4 Installing the IP21 Top Cover 8
2.5 Installing the Back-channel Cooling Option 9
3 Electrical Installation
3.1 Grounding Principles 11
3.2 Prerequisites for Cable Installation 11
3.3 Installing Power Cables 13
3.3.1 Installing the Power Cables through the Bottom 13
3.3.2 Installing the Power Cables through the Top (+KCIT or +KDOT) 14
3.4 Installing the Brake Cables, FE9, FE10 16
3.5 Power Cabling Floor Components, UL 16
3.6 Checking the Settings for the Auxiliary AC Voltage Transformer (+IHAT) 17
3.7 Parameter Settings for IT Mains 17
4 Control and Option Installation
4.1 Control Compartment Connections 18
4.2 I/O and Relay Option Connections 19
4.3 Control Cable Routing 22
4.4 Installing Boards to the Control Compartment 26
4.5 Wiring of the I/O and Relay Options 27
4.6 Installing the Control Cables 27
4.7 Installing the microSD Card 30
Danfoss Drives Oy © 2024.09 AN484843731544en-000101 / 172K4825A | 3
To Next Page
Loading...
