Danfoss m2 - Modem Configuration Settings; Baud Rate, Dial, Answer Codes, and Language

m2 Version 3.11 Manual RS.8A.N5.02 © Danfoss 10-2007 27
Language Selection
Answer
Baud Rate
Dial
Modem Conguration
When connected to a modem, use this option to congure the modem settings.
From the Setup Menu, select the Modem Conguration option.
Use the ‘ ’ or ‘ ’ keys to cycle through the valid baud rates to the required
value and press ‘↵’ to move onto the next eld.
Enter the dial code you require. Use the ‘ ’and ‘ ’ keys to cycle through the
character list and the ‘‘and ‘‘ keys to move the cursor left or right respectively.
Enter the answer code you require. Use ‘ ’ or ‘ ’ keys to cycle through the
character list and the ‘ ‘ or ‘ ‘ key to move the cursor left or right respectively.
Note: Refer to your modem handbook for details of the valid modem
commands and answer codes.
When you have nished or to abandon the operation, press ‘ ’ once to
return to the Setup Menu and again to return to the Main Menu.
The m2 supports several languages, as listed below:
English Swedish Hungarian
French Norwegian Polish
German Danish Czech
Dutch Icelandic Finnish
Italian Spanish
Selecting Change Language from the Setup Menu will present you with the
appropriate list of languages for your unit. Selection of the required language
will refresh the screen to display the Main Menu in the new language and will
automatically adjust the range of Diacritics (accented characters) available in
Edit Fields.