Par. No. # Parameter description Default value 4-set-up Change during opera-
tion
Conver-
sion index
Type
18-0* Maintenance Log
18-00 Maintenance Log: Item 0 N/A All set-ups FALSE 0 Uint8
18-01 Maintenance Log: Action 0 N/A All set-ups FALSE 0 Uint8
18-02 Maintenance Log: Time 0 s All set-ups FALSE 0 Uint32
18-03 Maintenance Log: Date and Time ExpressionLimit All set-ups FALSE 0 TimeOfDay
18-3* Inputs & Outputs
18-30 Analog Input X42/1 0.000 N/A All set-ups FALSE -3 Int32
18-31 Analog Input X42/3 0.000 N/A All set-ups FALSE -3 Int32
18-32 Analog Input X42/5 0.000 N/A All set-ups FALSE -3 Int32
18-33 Analog Out X42/7 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-34 Analog Out X42/9 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-35 Analog Out X42/11 [V] 0.000 N/A All set-ups FALSE -3 Int16
8.3.16. Data Readouts 2 18-**
8. How to programme the frequency converter
VLT
®
AQUA Drive
Operating Instructions
126
MG.20.M5.02 - VLT
®
is a registered Danfoss trademark
8
To Next Page
Loading...
