Danfoss VLT AQUA Drive FC 202 Operating Instructions

5.1.6. Mains connection for A2 and A3
Illustration 5.6: First mount the two screws on the mounting plate, slide it into place and tighten fully.
Illustration 5.7: When mounting cables, first mount and tighten earth cable.
The earth connection cable cross section must be at least 10 mm
2
or 2 rated mains wires terminated separately according to EN 50178/
IEC 61800-5-1
.
5. Electrical installation
VLT
®
AQUA Drive
Operating Instructions
24 MG.20.M5.02 - VLT
®
is a registered Danfoss trademark
5

Danfoss VLT AQUA Drive FC 202 Specifications

General

Brand	Danfoss
Model	VLT AQUA Drive FC 202
Category	DC Drives
Language	English