Danfoss vlt aqua Programming Guide

Read only
0 *
[0 - 115] This parameter displays a list of all the defined frequency con-
verter parameters available for Profibus.
9-83 Defined Parameters (4)
Array [116]
No LCP access
Read only
0 *
[0 - 115] This parameter displays a list of all the defined frequency con-
verter parameters available for Profibus.
9-90 Changed Parameters (1)
Array [116]
No LCP access
Read only
0 *
[0 - 115] This parameter displays a list of all the frequency converter pa-
rameters deviating from default setting.
9-91 Changed Parameters (2)
Array [116]
No LCP access
Read only
0 *
[0 - 115] This parameter displays a list of all the frequency converter pa-
rameters deviating from default setting.
9-92 Changed Parameters (3)
Array [116]
No LCP access
Read only
2. Parameter Description VLT
®
AQUA Drive Programming Guide
124 MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
2

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled