Danfoss vlt aqua Programming Guide

2.14. Main Menu - Frequency Converter Information -
Group 15
2.14.1. 15-** Drive Information
Parameter group containing frequency converter information such as operating data, hardware
configuration and software versions.
2.14.2. 15-0* Operating Data
Parameter group containing operating data e.g. Operating Hours, kWh counters, Power Ups, etc.
15-00 Operating Hours
Range: Function:
0h
*
[0 - 2147483647 h] View how many hours the frequency converter has run. The
value is saved when the frequency converter is turned off.
15-01 Running Hours
Range: Function:
0h
*
[0 - 2147483647 h] View how many hours the motor has run. Reset the counter in
par. 15-07. The value is saved when the frequency converter is
turned off.
15-02 kWh Counter
Range: Function:
0kWh
*
[0 - 2147483647
kWh]
Registering the power consumption of the motor as a mean val-
ue over one hour. Reset the counter in par. 15-06.
15-03 Power Up's
Range: Function:
0
*
[0 - 2147483647] View the number of times the frequency converter has been
powered up.
15-04 Over Temp's
Range: Function:
0
*
[0 - 65535] View the number of frequency converter temperature faults
which have occurred.
2. Parameter Description VLT
®
AQUA Drive Programming Guide
152 MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
2

Danfoss vlt aqua Specifications

General

Brand	Danfoss
Model	vlt aqua
Category	DC Drives
Language	English