Danfoss vlt aqua Programming Guide

15-44 Ordered Typecode String
Option: Function:
View the type code string used for re-ordering the frequency
converter in its original configuration.
15-45 Actual Typecode String
Option: Function:
View the actual type code string.
15-46 Frequency Converter Ordering No
Option: Function:
View the 8-digit ordering number used for re-ordering the fre-
quency converter in its original configuration.
15-47 Power Card Ordering No
Option: Function:
View the power card ordering number.
15-48 LCP Id No
Option: Function:
View the LCP ID number.
15-49 SW ID Control Card
Option: Function:
View the control card software version number.
15-50 SW ID Power Card
Option: Function:
View the power card software version number.
15-51 Frequency Converter Serial Number
Option: Function:
View the frequency converter serial number.
15-53 Power Card Serial Number
Option: Function:
View the power card serial number.
VLT
®
AQUA Drive Programming Guide 2. Parameter Description
MG.20.O2.02 - VLT
®
is a registered Danfoss trademark 159
2

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled