Danfoss vlt aqua Programming Guide

15-31 Fault Log: Value
Array [10]
0 *
[-32767 - 32767] View an extra description of the error. This parameter is mostly
used in combination with alarm 38 ‘internal fault’.
15-32 Fault Log: Time
Array [10]
0 *
[0 - 2147483647] View the time when the logged event occurred. Time is meas-
ured in seconds from frequency converter start-up.
2.14.6. Drive Identification, 15-4*
Parameters containing read only information about the hardware and software configuration of
the frequency converter.
15-40 FC Type
Option: Function:
View the FC type. The read-out is identical to theVLT AQUA
Drive Series power field of the type code definition, characters
1-6.
15-41 Power Section
Option: Function:
View the FC type. The read-out is identical to the VLT AQUA
Drive Series power field of the type code definition, characters
7-10.
15-42 Voltage
Option: Function:
View the FC type. The read-out is identical to the VLT AQUA
Drive Series power field of the type code definition, characters
11-12.
15-43 Software Version
Option: Function:
View the combined SW version (or ‘package version’) consisting
of power SW and control SW.
2. Parameter Description VLT
®
AQUA Drive Programming Guide
158 MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
2

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled