Danfoss vlt aqua Programming Guide

31-10 Bypass Status Word
Range: Function:
0
*
[0 - 65535] Views the status of the bypass as a hexadecimal value.
31-11 Bypass Running Hours
Range: Function:
0 hr
*
[0 - 2147483647 hrs] Views the number of hours in which the motor has run in Bypass
Mode. The counter can be reset in par. 15-07. The value is
saved, when the frequency converter is turned off.
31-19 Remote Bypass Activation
Option: Function:
[0]
*
Disabled
[1] Enabled Feature: Unknown.
2. Parameter Description VLT
®
AQUA Drive Programming Guide
256 MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
2

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled