Danfoss vlt aqua Programming Guide

Par. No. #
Parameter description Default value 4-set-up FC 302
only
Change during op-
eration
Conver-
sion index
Type
21-6* Ext. CL 3 PID 21-60 Ext. 3 Normal/Inverse Control [0] Normal All set-ups TRUE - Uint8 21-61 Ext. 3 Proportional Gain 0.5 All set-ups TRUE -2 Uint16
21-62 Ext. 3 Integral Time 20.0 s All set-ups TRUE -2 Uint32
21-63 Ext. 3 Differentation Time 0.00 s All set-ups TRUE -2 Uint16
21-64 Ext. 3 Dif. Gain Limit 5.0 N/A All set-ups TRUE -1 Uint16
3. Parameter Lists VLT
®
AQUA Drive Programming Guide
280 MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
3

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled