EasyManua.ls Logo

Danfoss vlt aqua - Page 34

Danfoss vlt aqua
298 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[1831] Analog Input X42/3 Shows the value of the signal applied to terminal X42/3 on the
Analog I/O card.
[1832] Analog Input X42/5 Shows the value of the signal applied to terminal X42/5 on the
Analog I/O card.
[1833] Analog Out X42/7 [V] Shows the value of the signal applied to terminal X42/7 on the
Analog I/O card.
[1834] Analog Out X42/9 [V] Shows the value of the signal applied to terminal X42/9 on the
Analog I/O card.
[1835] Analog Out X42/11
[V]
Shows the value of the signal applied to terminal X42/11 on the
Analog I/O card.
[2117] Ext. 1 Reference
[Unit]
The value of the reference for extended Closed Loop Controller
1
[2118] Ext. 1 Feedback [Unit] The value of the feedback signal for extended Closed Loop Con-
troller 1
[2119] Ext. 1 Output [%] The value of the output from extended Closed Loop Controller
1
[2137] Ext. 2 Reference
[Unit]
The value of the reference for extended Closed Loop Controller
2
[2138] Ext. 2 Feedback [Unit] The value of the feedback signal for extended Closed Loop Con-
troller 2
[2139] Ext. 2 Output [%] The value of the output from extended Closed Loop Controller
2
[2157] Ext. 3 Reference
[Unit]
The value of the reference for extended Closed Loop Controller
3
[2158] Ext. 3 Feedback [Unit] The value of the feedback signal for extended Closed Loop Con-
troller 3
[2159] Ext. Output [%] The value of the output from extended Closed Loop Controller
3
[2230] No-Flow Power The calculated No Flow Power for the actual operating speed
[2580] Cascade Status Status for the operation of the Cascade Controller
[2581] Pump Status Status for the operation of each individual pump controlled by
the Cascade Controller
NB!
Please consult the VLT
®
AQUA Drive Programming Guide, MG.20.OX.YY for
detailed information.
0-21 Display Line 1.2 Small
Option: Function:
Select a variable for display in line 1, middle position.
[1662]
*
Analog input 53 The options are the same as those listed for par. 0-20
Display
Line 1.1 Small
.
2. Parameter Description VLT
®
AQUA Drive Programming Guide
34
MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
2

Other manuals for Danfoss vlt aqua

Related product manuals