Danfoss VLT AutomationDrive FC 300 Series - Page 91

Description Pos Possible choices
C0/ E0 options 33-
34
CX: No option
C4: MCO 305, Programmable Motion
Controller
BK: MCB 101 General purpose I/O in E0
BZ: MCB 108 Safety PLC Interface in E0
C1 options/
A/B in C
Option
Adaptor
35 X: No option
R: MCB 113 Ext. Relay Card
Z: MCA 140 Modbus RTU OEM option
E: MCF 106 A/B in C Option Adaptor
C option
software/E1
options
36-
37
XX: Standard controller
10: MCO 350 Synchronizing control
11: MCO 351 Positioning control
12: MCO 352 Center winder
AN: MCA 121 Ethernet IP in E1
BK: MCB 101 General purpose I/O in E1
BZ: MCB 108 Safety PLC Interface in E1
D options 38-
39
DX: No option
D0: MCB 107 Ext. 24V DC back-up
Table 5.4 Ordering Type Code, Options
How to Order
VLT
®
AutomationDrive FC 300 Design Guide, 0.25-75 kW
MG33BE02 - VLT
®
is a registered Danfoss trademark 89
5 5
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-21462-Danfoss-131B8966-VLT-Automation-VT-Drive-VFD-FC301-230V-5-HP.aspx