Danfoss VLT AutomationDrive FC 301 Programming Guide

Option
Name
Description
[121]
Remote ref active
Output is high when parameter 3-13 Reference Site = [1] Remote or [0] Linked to hand/auto while
the LCP.
[122]
No alarm
Output is high when no alarm is present.
[123]
Start command ac-
tive
Output is high when the start command is high (that is via digital input, bus connection, [Hand
On], or [Auto On]), and a stop has been the last command.
[124]
Running reverse
Output is high when the drive is running counterclockwise (the logical product of the status bits
running AND reverse).
[125]
Drive in hand mode
Output is high when the drive is in hand-on mode (as indicated by the LED light above [Hand
On]).
[126]
Drive in auto mode
Output is high when the drive is in auto-on mode (as indicated by LED light on above [Auto
On]).
[151]
ATEX ETR cur. alarm
Selectable if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced ETR.
If alarm 164, ATEX ETR cur.lim.alarm is active, the output is 1.
[152]
ATEX ETR freq.
alarm
Selectable if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced ETR.
If alarm 166, ATEX ETR freq.lim.alarm is active, the output is 1.
[153]
ATEX ETR cur. warn-
ing
Selectable if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced ETR.
If alarm 163, ATEX ETR cur.lim.warning is active, the output is 1.
[154]
ATEX ETR freq.
warning
Selectable if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced ETR.
If warning 165, ATEX ETR freq.lim.warning is active, the output is 1.
[173]
10Wh counter pulse
[178]
RS Flipflop 8
See parameter group 13-1* Comparators.
[179]
RS Flipflop 9
See parameter group 13-1* Comparators.
[180]
Clock fault
[181]
Prev. Maintenance
[188]
AHF Capacitor Con-
nect
[189]
External Fan Control
The internal logics for the internal fan control is transferred to this output to make it possible to
control an external fan (relevant for hp duct cooling).
[190]
Safe Function active
[191]
Safe Opt. Reset req.
[192]
RS Flipflop 0
See parameter group 13-1* Comparators.
[193]
RS Flipflop 1
See parameter group 13-1* Comparators.
[194]
RS Flipflop 2
See parameter group 13-1* Comparators.
[195]
RS Flipflop 3
See parameter group 13-1* Comparators.
[196]
RS Flipflop 4
See parameter group 13-1* Comparators.
[197]
RS Flipflop 5
See parameter group 13-1* Comparators.
[198]
RS Flipflop 6
See parameter group 13-1* Comparators.
AU275636650261en-000101 / 130R0334214 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English