Danfoss VLT FC 103 Programming Guide

Par. No. # Parameter description Default value 4-set-up Change
during
operation
Conver-
sion
index
Type
28-81 dP0 Offset 0 K All set-ups TRUE -1 Int32
28-82 P0 0 K All set-ups TRUE -3 Int32
28-83 P0 Setpoint 0 K All set-ups TRUE -3 Int32
28-84 P0 Reference 0 K All set-ups TRUE -3 Int32
28-85 P0 Minimum Reference 0 K All set-ups TRUE 0 Int32
28-86 P0 Maximum Reference 0 K All set-ups TRUE 0 Int32
28-87 Most Loaded Controller 0 N/A All set-ups TRUE 0 Int16
28-9* Injection Control
28-90 Injection On [0] Off All set-ups TRUE - Uint8
28-91 Delayed Compressor Start [0] No All set-ups TRUE - Uint8
Table 4.23
Parameter Lists
VLT
®
Refrigeration Drive Programming Guide
188 MG16H102 - VLT
®
is a registered Danfoss trademark
44

Danfoss VLT FC 103 Specifications

General

Brand	Danfoss
Model	VLT FC 103
Category	DC Drives
Language	English