Danfoss VLT FC 302 User Manual

6.3.19 18-** Data Readouts 2
Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
18-3* Analog Readouts
18-36 Analog input X48/2 [mA] 0.000 N/A All set-ups TRUE -3 Int32
18-37 Temp. input X48/4 0 N/A All set-ups TRUE 0 Int16
18-38 Temp. input X48/7 0 N/A All set-ups TRUE 0 Int16
18-39 Temp. input X48/10 0 N/A All set-ups TRUE 0 Int16
18-6* Inputs & Outputs 2
18-60 Digital input 2 0 N/A All set-ups FALSE 0 Uint16
18-90 PID Readouts
18-90 Process PID error 0.0 % All set-ups FALSE -1 Int16
18-91 Process PID output 0.0 % All set-ups FALSE -1 Int16
18-92 Process PID clamped output 0.0 % All set-ups FALSE -1 Int16
18-93 Process PID gain scaled output 0.0 % All set-ups FALSE -1 Int16
Programming Operating Instructions
MG37A202 Danfoss A/S © Rev. 2014-07-29 All rights reserved. 99
6 6

Danfoss VLT FC 302 Specifications

General

Brake Function	Built-in brake chopper in all units up to 22 kW
Output Voltage Range	0-100% of input voltage
Power Range	0.37 kW
Control Modes	VVCplus, Flux, U/f
Protection Features	Overvoltage, undervoltage, overcurrent, short circuit, overtemperature, overload
Communication Options	Modbus RTU, BACnet, Ethernet/IP, Profinet, Profibus, CANopen, DeviceNet
Ambient Temperature Range	-10°C to +50°C (derating above +40°C)
Enclosure Rating	IP20, IP21, IP55
Cooling Method	Air-cooled
Input Voltage	200-240V, 380-480V, 525-600V