Danfoss VLT FC 302 User Manual

6.3.18 17-** Motor Feedb.Option
Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
17-1* Inc. Enc. Interface
17-10 Signal type [1] RS422 (5V TTL) All set-ups FALSE - Uint8
17-11 Resolution (PPR) 1024 N/A All set-ups FALSE 0 Uint16
17-2* Abs. Enc. Interface
17-20 Protocol selection [0] None All set-ups FALSE - Uint8
17-21 Resolution (positions/rev) App.Dependent All set-ups FALSE 0 Uint32
17-24 SSI data length 13 N/A All set-ups FALSE 0 Uint8
17-25 Clock rate App.Dependent All set-ups FALSE 3 Uint16
17-26 SSI data format [0] Gray code All set-ups FALSE - Uint8
17-34 HIPERFACE baudrate [4] 9600 All set-ups FALSE - Uint8
17-5* Resolver Interface
17-50 Poles 2 N/A 1 set-up FALSE 0 Uint8
17-51 Input voltage 7.0 V 1 set-up FALSE -1 Uint8
17-52 Input frequency 10.0 kHz 1 set-up FALSE 2 Uint8
17-53 Transformation ratio 0.5 N/A 1 set-up FALSE -1 Uint8
17-56 Encoder sim. resolution [0] Disabled 1 set-up FALSE - Uint8
17-59 Resolver interface [0] Disabled All set-ups FALSE - Uint8
17-6* Monitoring and App.
17-60 Feedback direction [0] Clockwise All set-ups FALSE - Uint8
17-61 Feedback signal monitoring [1] Warning All set-ups TRUE - Uint8
Programming Operating Instructions
98 Danfoss A/S © Rev. 2014-07-29 All rights reserved. MG37A202
66

Danfoss VLT FC 302 Specifications

General

Brake Function	Built-in brake chopper in all units up to 22 kW
Output Voltage Range	0-100% of input voltage
Power Range	0.37 kW
Control Modes	VVCplus, Flux, U/f
Protection Features	Overvoltage, undervoltage, overcurrent, short circuit, overtemperature, overload
Communication Options	Modbus RTU, BACnet, Ethernet/IP, Profinet, Profibus, CANopen, DeviceNet
Ambient Temperature Range	-10°C to +50°C (derating above +40°C)
Enclosure Rating	IP20, IP21, IP55
Cooling Method	Air-cooled
Input Voltage	200-240V, 380-480V, 525-600V