6.3.14 13-** Smart Logic
Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion
index
Type
13-0* SLC Settings
13-00 SL controller mode null 2 set-ups TRUE - Uint8
13-01 Start event null 2 set-ups TRUE - Uint8
13-02 Stop event null 2 set-ups TRUE - Uint8
13-03 Reset SLC [0] Do not reset SLC All set-ups TRUE - Uint8
13-1* Comparators
13-10 Comparator operand null 2 set-ups TRUE - Uint8
13-11 Comparator operator null 2 set-ups TRUE - Uint8
13-12 Comparator value App.Dependent 2 set-ups TRUE -3 Int32
13-1* RS Flip Flops
13-15 RS-FF operand S null 2 set-ups TRUE - Uint8
13-16 RS-FF operand R null 2 set-ups TRUE - Uint8
13-2* Timers
13-20 SL controller timer App.Dependent 1 set-up TRUE -3 TimD
13-4* Logic Rules
13-40 Logic rule boolean 1 null 2 set-ups TRUE - Uint8
13-41 Logic rule operator 1 null 2 set-ups TRUE - Uint8
13-42 Logic rule boolean 2 null 2 set-ups TRUE - Uint8
13-43 Logic rule operator 2 null 2 set-ups TRUE - Uint8
13-44 Logic rule boolean 3 null 2 set-ups TRUE - Uint8
13-5* States
13-51 SL controller event null 2 set-ups TRUE - Uint8
13-52 SL controller action null 2 set-ups TRUE - Uint8
Programming Operating Instructions
MG37A202 Danfoss A/S © Rev. 2014-07-29 All rights reserved. 91
6 6
To Next Page
Loading...
