Danfoss VLT FC 302

Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion
index
Type
15-6* Option Ident
15-60 Option mounted 0 N/A All set-ups FALSE 0 VisStr[30]
15-61 Option SW version 0 N/A All set-ups FALSE 0 VisStr[20]
15-62 Option ordering no 0 N/A All set-ups FALSE 0 VisStr[8]
15-63 Option serial no 0 N/A All set-ups FALSE 0 VisStr[18]
15-70 Option in slot A 0 N/A All set-ups FALSE 0 VisStr[30]
15-71 Slot A option SW version 0 N/A All set-ups FALSE 0 VisStr[20]
15-72 Option in slot B 0 N/A All set-ups FALSE 0 VisStr[30]
15-73 Slot B option SW version 0 N/A All set-ups FALSE 0 VisStr[20]
15-74 Option in slot C0 0 N/A All set-ups FALSE 0 VisStr[30]
15-75 Slot C0 option SW version 0 N/A All set-ups FALSE 0 VisStr[20]
15-76 Option in slot C1 0 N/A All set-ups FALSE 0 VisStr[30]
15-77 Slot C1 option SW version 0 N/A All set-ups FALSE 0 VisStr[20]
15-9* Parameter Info
15-92 Defined parameters 0 N/A All set-ups FALSE 0 Uint16
15-93 Modified parameters 0 N/A All set-ups FALSE 0 Uint16
15-98 Drive identification 0 N/A All set-ups FALSE 0 VisStr[40]
15-99 Parameter metadata 0 N/A All set-ups FALSE 0 Uint16
Programming Operating Instructions
MG37A202 Danfoss A/S © Rev. 2014-07-29 All rights reserved. 95
6 6