Danfysik 9700 - Page 21

System 9700 User Manual
Page 21 of 56
Scroll
menu
Sub-menu 1 Sub-menu 2 Sub menu 3 Comment
AD-CHAN
CHN 0
-
8
A/D Channels 0 to 8
Output current
Ambient temperature
Vout
Internal +15V
Internal -15V
Internal +5V
Delta Temperature
I Set Value
Optional Iout 16 bit resolution
Output current 3 significant digits
Internal sensor
Output Voltage 0 - 120%
Internal control voltage
Internal control voltage
Internal control voltage
Delta temperature inside
regulated area
Output setting current
Output current 5 significant digits
CHN 9-15
A/D Channels 9 to 15
I out
Not Used
Output current for display
Output voltage for display
Not Used
Not Used
Not Used
Not Used
I set value
Output current for bar graph
Output current for display, in ampere
Output voltage for display, in voltage
Output setting current
DA
-
CHAN
Setting of D/A Channels
SETUP
Sets working conditions
BAUD M-Panel Baud rate setting
1200,
2400,
9600,
19200,
- 38400
- 57600
- 76800
-
115200
Communication may be lost when
changing the baud rate.
COLOUR
LED Colour
Interlock
PSU ready
Power ON
Power OFF
Set to RED, GREEN or
“YELLOW”
SOUND
Buzzer ON or OFF
DEFAULT
Set to factory default
OPTION
ADR
Multidrop Address
enable
HISTORY
OPEN LOG Se chapter 3.2.4 “History
Window” for further information.