What to do if DataCard CR805 does not install or print when connected to a remote network via VPN?
If your DataCard Printer doesn't install or print while your PC is connected to a remote network using VPN Client software, you can either configure your VPN software to allow local network connections or disconnect the VPN Client software from the network.
How do I reset the Activity Log on my DataCard Printer?
To reset the Activity Log, click 'Run'.
How do I reset the counters on my DataCard CR805 Printer?
To reset the counters, click 'Run'.
What to do if my DataCard Printer needs a restart?
To restart the printer, simply click 'Run'.
How to download the activity log from my DataCard CR805 Printer?
To download the activity log information, click 'Download' and save the file to a location on your PC. This log should be saved and sent to your service provider when you request service.
What to do if card has dirt on the magnetic stripe on DataCard Printer?
If the card has dirt or damage on the magnetic stripe, encode and send a new card to print using your DataCard Printer. If you receive an error message about a magnetic stripe problem, use a cleaning card to clean the magnetic stripe head.
Why are there scratches under the patch of DataCard CR805?
If there are scratches or particles under the patch of your DataCard Printer, the inside of the printer may be dirty. Clean the printer.
How to solve laminator entry card problem on DataCard Printer?
To address a laminator entry card problem with your DataCard Printer, open the laminator. Turn the knob to remove the card, and then close the laminator.
What to do if card is not in the laminator of DataCard CR805?
If the card is not where it should be in the laminator of your DataCard Printer, open the laminator and remove the L1 supply cartridge. Turn the knob to remove the card, then replace the supply cartridge and close the laminator.
What to do if card did not reach the required position on DataCard CR805?
If the card did not reach the required position on the K1 horizontal transport in your DataCard Printer, press the USER button to move the card into the reject tray and clear the error.
Lists the Windows operating systems supported by the Card Printer Driver.
Lists the Datacard and Entrust Datacard printers supported by the driver.
Provides an overview of the tasks performed by the Card Printer Driver after installation.
Explains how the printer and driver communicate via USB or network connections.
Step-by-step instructions for installing the driver via USB or network.
Process for updating an existing Card Printer Driver installation.
Procedure for updating the Card Printer Driver to the latest version.
Guidance on updating the driver on client PCs in a shared printer setup.
Options for connecting multiple printers to a single PC.
Guidelines for installing multiple printers using USB cables.
Enables secure, encrypted transmission of print commands and card data.
Step-by-step guide to configuring secure printing via Printer Manager.
Enables sharing a printer over a network using Microsoft File and Printer Sharing.
Enables printing to a group of printers acting as one.
Step-by-step instructions for configuring printer pooling.
Allows viewing printer settings and defining printer communication with the PC.
Displays printer status, port type, IP address, and printer information.
Procedures for removing the Card Printer Driver from the PC.
Specifies default settings for card printing via Printing Preferences.
Allows sending a card through the printer without printing on it.
Applies an additional layer of retransfer film for durability.
Specifies printing and non-printing areas on the card.
Selects preset masks for CR805 retransfer printers.
Ensures printer, manager, and driver are set up for rewritable printing.
Supports color print ribbons with a UV fluorescent panel for security.
Formatted text converted to printer commands for operations.
Methods to prevent printing and topcoat on specific card areas.
Blocks primer on smart card chips and applies inhibitor to magnetic stripes.
Formats magnetic stripe data when application cannot.
Applies a second layer of retransfer film for added durability.
Specifies font and position for embossed/indented data.
Provides fonts to format magnetic stripe data when escapes are not used.
Addresses common issues preventing successful driver installation.
Solves problems related to installing the driver via USB connection.
Solves problems related to installing the driver over a network connection.
Configures the host PC for printer sharing on Server OS.
Installs the driver on client PCs for Server OS sharing.
To Next Page
General
