DataCard SD360 - Card Printer Driver Management Tasks; Printer Properties Window Overview

SD Series Installation and Administrator’s Guide 41
ActivityLog
TheActivityLogsettingsallowyoutorecordtechnicalinformationaboutthe
printer.WebAdminorWebServiceaccess‐leveluserscanchangesettingsinthe
activitylogtohelptroubleshootandisolateacardproductionproblem.You
specifythetypesofactionstoincludeinthelogsandsettheseveritylevelfor
whentheactionshouldbewrittentothelog.Filterseverityleveloptionsare:
Emergency,Alert,Critical,Error,Warning,Notice,Information,Debug,Disabled.
• ExternalLog—EnableordisablewritingtheactivitylogtoanexternalSyslog
server.
• ExternalLogServer—SpecifytheIPaddressoftheexternalSyslogserverifyou
arewritingtoanexternallog(ExternalLogissettoEnabled).
• FilterCardActions—Writethestartandcompletionofacardactionwiththe
specifiedseverity,andhigher,totheactivitylog.
• FilterConfigChanges—Writeconfigurationchangeactionswiththespecified
severity,andhigher,totheactivitylog.
• FilterJobStates—Writechangestothestateofaprintorexceptionjobwith
thespecifiedseverity,andhigher,totheactivitylog.
• FilterSoapMsgs—WriteDPCL/Soap(SimpleObjectAccessProtocol)messages
fromtheprinterwiththespecifiedseverity,andhigher,totheactivitylog.
Description Default Value Current Value (unit)
1) ExternalLog Disabled Disabled
2) ExternalLogServer 0.0.0.0 0.0.0.0
3) FilterCardActions Notice Notice
4) FilterConfigChanges Notice Notice
5) FilterJobStates Notice Notice
6) FilterSoapMsgs Notice Notice
7) FilterSystem Notice Notice
8) InternalLog Enabled Enabled