DataCard SP55

10
SP Series Production e-Guide
7 Replace cards in the input hopper.
8 Print a card to verify the quality of printing. You can print a printer test card, a sample card, or a card using your
card creation application.
Cleaning the duplex module(s)
On SP55 printers with the optional duplex module, and on SP75 printers, clean the duplex rollers as described
next.
1 Locate the duplex rollers:
2 Clean the duplex rollers:
— Move the cleaning pen over the gray duplex rollers (1) while manually rotating the gear next to the rollers
(2).
— Flip the duplex module by pushing the top away from you (3).
— Clean the black rollers (4) while manually rotating the gear next to the rollers (5)
3 On SP75 printers, clean the lower duplex rollers as described in the previous step.